Not the same as a quite simple line drawing tool, such as a simple square meter, blocking board or triangular meter, more and more factory workers and engineers would prefer to make line measurement with a Pro red line laser alignment. It is projecting the purest red laser light from 635nm red laser diode. It is getting much brighter and more visible red laser beam than formally used 650nm red laser device. When industrial stabilized laser line generator employs qualified optic lens and basic inner thermal emitting system, it is always getting superior nice thermal emitting and highly stable red reference line projection in continuous use.
The real line measuring work with pro red line laser alignment is much easier than simple manual or mechanical line aligning device. It employs 635nm red laser diode as its beam emitting source, available with wide range output power of 5mW to 100mW, it is not only projecting highly intense and visible red laser beam at several miles, but also projecting highly fine red laser line within the maximum work distance of 25 meters. On condition that 635nm red laser module gets basic use of inner cooling system, designing with 16mm or 26mm diameter tube, it achieves superior nice thermal conductivity and extremely clear line alignment in long time use.
When pro red line laser alignment gets advanced use of qualified glass coated lens or separate crystal lens, not appearing with laser light decay or blur, it is keeping work with high linear quality red reference line projection in use. In multiple industrial line measuring work fields, in order to get various line lengths and line finenesses onto multiple targeting surfaces, this laser line generator enables freely selected fan angles within 10 degree to 110 degree. It projects different line lengths within 0.5 meter to 6 meters. Only if users are getting basic learning of technical data, after a series of experiment and measurement, it just gets correct selection of output power and optic lens until achieving the most satisfied line alignment constantly.
Whatever kind of output power it is selecting, pro red line laser alignment gets advanced use of APC, ACC driving circuit board. It is projecting seriously powerful red laser light from laser beam aperture, however, the intelligent feedback system just makes perfect protection from overheating and over current impact in continuous use. This alignment laser allows proper use within 8 to 10 hours per day, when users are making proper adjustment of laser beam focus and red reference line projecting direction correctly, it makes sure of highly secured and quick response line generation. When high power red laser module is selecting up to 50mW to 100mW, users should just wear correct laser safety goggles until achieving easy and fine measurement.
