Not the same as a quite simple line drawing tool, such as a simple square meter, blocking board or triangular meter, more and more factory workers and engineers would prefer to make line measurement with a Pro red line laser alignment. It is projecting the purest red laser light from 635nm red laser diode. It is getting much brighter and more visible red laser beam than formally used 650nm red laser device. When industrial stabilized laser line generator employs qualified optic lens and basic inner thermal emitting system, it is always getting superior nice thermal emitting and highly stable red reference line projection in continuous use.
The real line measuring work with pro red line laser alignment is much easier than simple manual or mechanical line aligning device. It employs 635nm red laser diode as its beam emitting source, available with wide range output power of 5mW to 100mW, it is not only projecting highly intense and visible red laser beam at several miles, but also projecting highly fine red laser line within the maximum work distance of 25 meters. On condition that 635nm red laser module gets basic use of inner cooling system, designing with 16mm or 26mm diameter tube, it achieves superior nice thermal conductivity and extremely clear line alignment in long time use.
When pro red line laser alignment gets advanced use of qualified glass coated lens or separate crystal lens, not appearing with laser light decay or blur, it is keeping work with high linear quality red reference line projection in use. In multiple industrial line measuring work fields, in order to get various line lengths and line finenesses onto multiple targeting surfaces, this laser line generator enables freely selected fan angles within 10 degree to 110 degree. It projects different line lengths within 0.5 meter to 6 meters. Only if users are getting basic learning of technical data, after a series of experiment and measurement, it just gets correct selection of output power and optic lens until achieving the most satisfied line alignment constantly.
Whatever kind of output power it is selecting, pro red line laser alignment gets advanced use of APC, ACC driving circuit board. It is projecting seriously powerful red laser light from laser beam aperture, however, the intelligent feedback system just makes perfect protection from overheating and over current impact in continuous use. This alignment laser allows proper use within 8 to 10 hours per day, when users are making proper adjustment of laser beam focus and red reference line projecting direction correctly, it makes sure of highly secured and quick response line generation. When high power red laser module is selecting up to 50mW to 100mW, users should just wear correct laser safety goggles until achieving easy and fine measurement.
Author: admin
Different Fan Angle 635nm 50mW Red Laser Line Generator
Without quite serious long time spending on any prior line printing or line drawing works, in order to make highly clear and accurate enough line alignment onto various targeting surfaces, it is always a quite easy job for users to make use of a 635nm 50mW red laser line generator. It is generating high purity red laser light from 635nm red laser diode. When it is getting at least 3 times brighter red laser light from formal brightness 650nm red laser device, on basis of quite nice use of qualified optic lens with different fan angle, this 635nm red line projecting laser module is always effective enough to gain the most accurate line projection in distance.
Not the same as a quite simple red laser pointer device, this 635nm 50mW red laser line generator is required to generate a bit more complex laser light in type of a straight red reference line from beam aperture. It gets special use of glass coated lens or separate crystal lens. Even though it is used for quite long time or quite long work distance, this red laser module is always workable with required laser beam fan angle from 10 to 110 degree. According to easy selection of red reference length within 0.5 meter to 6 meters, it will fulfilling quite satisfied line positioning result for various industrial and high tech line aligning works efficiently.
Not the same as a quite simple red laser pointer with inner alkaline battery power source, the operation of 635nm 50mW red laser line generator is selecting external electric power source of DC input power supply. It is a high power laser line module device. On consideration of super strong industrial stabilization, it is adopting quite larger size tube diameter of 26mm aluminum alloy housing tube. When there is enough space leaving for metal heat sink cooling system and copper made 635nm red laser diode, this line laser alignment tool achieves superior nice thermal conductivity and highly stable red reference line projection constantly.
No matter how long it is lasting for continuous line alignment work, 635nm 50mW red laser line generator gets the most important design part of APC, ACC driving circuit board. When it gets perfect protection of laser module tube from serious electric current impact and increasing temperature, it is able to work with extremely stable and reliable red reference line projection within 8 to 10 hours. Whenever it is projecting the most powerful red laser light and thermal energy, under proper use of 635nm wavelength preventing laser safety goggles and avoiding eye exposure, this industrial stabilized alignment laser achieves high security and no mistake line alignment constantly.
Green Line Laser Alignment 5mW to 100mW
In any working occasion where users are trying to make highly clear and accurate line projection onto different targeting surfaces, no matter it is pointed onto different targeting surfaces, any simple line drawing device, such as a formal square meter or blocking board is not able to make super clear line projection as expected. When laser tech engineer is making super great technical innovation of advanced green line laser alignment, after perfect equipment with qualified optic lens and constant electric power source, it is a real and practically used laser line measuring tool for all precise device manufacturing works effectively.
Not simply relying on manual line drawing or line printing works, under operation with a green line laser alignment, it is able to work with continuous green reference line projection after connect with a DC input power supply. It is always making continuous green reference line targeting from beam aperture. Within wide range electric current from 100V to 240V, this laser line generator is easily used in majority countries and regions. After converting into different operating voltage of 5V or 9V operating voltage, it is able to work with continuous and highly stable green reference line projection, including high temperature and strong corrosion as well.
Being made with the best quality glass coated lens or separate crystal lens, on basis of quite strict laser beam stability tests and up to 24 hours aging preventing tests, green line laser alignment is always workable with high linear quality and high fineness green reference line projection in use. Under condition that green laser module gets different fan angle from 10 degree to 110 degree, after production into different line length from 0.5 meter to 6 meters, it is always getting quite satisfied line positioning result on any vertical or horizontal surfaces.
On basis of quite easy installation on any other machine or device, with the assistance of laser alignment mounting bracket and freely installed distance within the maximum distance of 3 meters, green line laser alignment enables the most convenient installation and adjustment, and then producing highly clear green reference line onto targeting surface as expected. For the most important of all, after quite easy adjustment of laser line thickness and line targeting direction within three dimensions, this alignment laser always assures the most satisfied line positioning result in distance. Only according to high attention to intense laser light and produced thermal energy from beam aperture, it is only a necessity to wear laser safety goggles so as to achieve highly secured and fine alignment constantly.
Intense Light High Power Red Laser Diode Module
Not simply relying on manual labor force input and quite long time spending on prior dot positioning works, it the is a major trend for user for the selection of high power red laser diode module. After easy connect with an external DC input power supply, it is always workable with the most intense and powerful red laser light emission and highly clear red reference dot projection in distance easily. On condition that high power red dot laser gets quite larger space leaving for thermal emitting and specially designed with separate thermal emitting system, it is always effective enough to gain highly stable and reliable red reference dot projection in continuous use.
The genuine dot alignment with high power red laser diode module is used for quite long time. In process of the most stable dot projection work, it is making use of external DC input power supply. Equipped with separate metal heat sink cooling system, when dot laser alignment tool gets the largest space leaving for laser tube cooling down, it is just achieving superior nice thermal conductivity and super strong environmental stabilization. The special use of aircraft used aluminum alloy housing tube is protecting laser tube itself from serious mechanical shocking, moving or calibration etc.
Under the selection of import 650nm red laser diode, beginning with high power up to 150mW to 500mW, this high power red laser diode module always generates the most powerful red laser light and thermal energy from beam aperture. When laser tech engineer is making super great consideration of thermal emitting and industrial stabilization, this dot laser alignment tool is being made with APC, ACC driving circuit board. Even though there is super rapid temperature increasing, however, the intelligent feedback system is protecting laser tube from overheating and over electric current impact.
Under considered operating time within 8 to 10 hours per day, only if there is enough time and space leaving for laser tube cooling down, high power red laser diode module gets the most efficient thermal conductivity and extremely stable red reference dot projection and long serving lifetime in constant use. Any possibility of eye exposure to beam aperture from high power red alignment laser might cause serious hurt to human eyes. Whenever users are paying high attention to powerful red laser light and possible thermal hurt, after proper wearing of laser safety goggles, high power red laser achieves high security measurement constantly.
Highly Stable 5mW Blue Laser Pointer
When I am seeking fun for laser presentation, besides the use of formal green laser device, I just find that 5mW blue laser pointer is a very nice choice to so. It is not as bright as a 532nm or 473nm laser devices, however, it is projecting quite charming and attractive blue laser beam and blue dot from beam aperture. I am enjoyed to make dot presentation with such laser device. Any time it is easily inserted with 2 pieces of Alkaline battery power source, it is able to make the most wonderful and marvelous dot presentation for multiple working occasions efficiently.
The usual design with a blue laser pointer is very simple. It is adopting inner metal heat sink cooling system, which is getting much better thermal emitting than formal air or water cooling, obtaining at least 5 times better thermal emitting in continuous work. According to the design with aircraft used aluminum alloy housing tube, in process of continuous blue laser dot projection work, it is obtaining superior nice thermal conductivity and highly stable performance in continuous work. For the most important of all, even though there is quite harsh working occasion blue laser it is used, however, this high durable laser pointer tool is also bearing super wide range temperature within -10 to 45 degree Celsius.
Not as bright as a 473nm blue DPSS laser part, however, this 5mW blue laser pointer is selecting 450nm blue laser diode as its beam emitting source. When it is producing blue laser beam directly from laser beam aperture, it is always able to work with even more stable dot positioning for even longer time than formal laser pointer device. In practical laser dot targeting work, it is able to work within 30 seconds, while still getting no appearance of laser light dim or blur in continuous pointing work.
Until the time laser tech engineer is making quite strict laser beam stability tests up to 24 hours, under operation with basic laser operating rules, 5mW blue laser pointer is just keeping highly reliable performance and extremely long serving lifetime as expected. Even though it is only a Class IIIa laser pen device, however, it is still a basic issue for users to pay attention to laser safety measure and avoid eye exposure to laser beam aperture.
Easy Mounted High Power Infrared Dot Laser Alignment
When users are not able to make extremely clear and accurate dot measurement under night vision, it is not useful at all to only use visible laser devices. However, when laser tech engineer is developing a quite high power infrared dot laser alignment, under correct equipment with night vision device, which is able to work with extremely intense infrared laser light emission and highly accurate and clear IR reference dot projection in distance. This long wavelength made infrared laser module is only used as an accessory part, making quite convenient and accurate IR dot generation under all night illumination fields.
Owing to the employment of high power 980nm infrared laser diode up to 600mW to 1000mW, high power infrared dot laser alignment is always projecting quite high photoelectric ability up to 80%, which will easily obtaining the most intense and powerful infrared laser beam and highly clear infrared laser dot projection in distance. The genuine IR dot projection is not able to be used separately. Only if it is used under night vision device, such as a CCD camera, black and white camera or infrared laser camera, this infrared laser module would always make highly clear IR dot emission as long as 100 to 1000 meters in distance.
When high power infrared dot laser alignment is being made with import 808nm infrared laser diode, and separate metal heat sink cooling system, this metal housing tube made laser device always gets the largest space reserving as its thermal emitting system. In addition, in continuous IR dot aligning work, infrared laser module is getting the most rapid temperature increasing, which might increase possibility of laser module tube cooling down or burning out. When laser tech engineer is design it with APC, ACC driving circuit board, under constant output power and electric current supply, it is always getting excellent laser light cycling use and extremely stable IR reference dot projection in use.
In process of continuous dot positioning work, high power infrared dot laser alignment and DC input power supply are being made with electric wires extension. Featured by high temperature and strong corrosion resistance, and freely installed distance within 3 meters, it is allowing quite convenient installation. In addition, owing to quite special laser beam focus adjustment, after quite rapid laser light concentration from beam aperture, this alignment laser ensures the most compact size IR dot positioning result in distance. Any possible infrared laser beam exposure might cause serious hurt to human eyes. Only if users are avoiding eye exposure to beam aperture and remember to wear professional infrared laser safety goggles, it always gets secured and easy measurement constantly.
What is the Most Accurate Cross Line Laser
Comparing with formal dot or line projecting device, cross line laser is emitting the most complex laser beam in type of two perpendicular lines with accurate 90 degrees on desired working surfaces. According to inner design of glass coated lens, selected from 10, 15 and 110 degree, it is projecting different cross line length and also keeping high linear quality and high straightness cross line source projection in use. Under easy selection of output power and optic lens degree, after quite easy installation on desired machine or device, it is making quite easy and convenient cross line measurement for various precise device manufacturing works effectively.
Cross line laser module is adopting external DC power supply, it is always getting much better performance than formal alkaline battery power source, since it is able to work with continuous vertical and horizontal lines generation in distance, without spending extra time on battery change. In addition, usually cross laser module is getting freely selected violet, blue, green, red and infrared laser devices etc. When it is getting wide range output power within 5mW to 1000mW, after correct equipment with 3V, 5V, 9V or 12V operating voltage electric power source, it is just able to work with highly bright and clearly visible cross line source projection.
When cross line laser is being made with the best quality glass coated lens, without any worrying about laser light decay or dim caused by formal plastic coated lens, it is easily achieving high linear quality and highly fine cross line source in use. Whatever kind of output power or wavelength it is selected, this cross laser alignment tool is passing through quite strict laser beam stability tests. Under multiple working environments, such as mechanical shocking, calibration or moving etc, this compact structure made laser device is always keeping quite accurate cross line projection in distance easily.
According to the adoption of aircraft used aluminum alloy housing tube and inner APC, ACC driving circuit board, cross line laser is always keeping highly reliable and stable performance. Even though it is selected with quite high power, under serious intense electric current impacting and constant increasing temperature, it is not affected at all, but just getting perfect protection of inner laser diode and electric driving circuit board from burning out or damage. Under proper installation and adjustment to correct position, this industrial stabilized cross line laser achieves easy and clear alignment perfectly.
Industrial Blue Line Laser Review
In order to get the most convenient and accurate line alignment at much longer work distance, it is not helpful at all to adopt any manual line drawing device, such as a simple square meter, blocking board or triangular meter. However, under selection of advanced laser diode tech applied industrial blue line laser, after quite easy connect with a DC input power supply, it is making sure of continuous blue reference line projection in distance immediately. When 445nm blue laser module is available with wide range output power of 50mW to 100mW, being made with excellent thermal emitting system, it is always making sure of the most stable and clearest blue reference line projection in distance easily.
In process of continuous line alignment works for modern time machinery processing works, industrial blue line laser is required to make continuous line positioning work on various targeting surfaces. It is selecting metal heat sink cooling system, when it is obtaining even better thermal emitting than formal air or water cooling, this blue laser module achieves superior stable line alignment in continuous use. In addition, owing to quite special design of APC, ACC driving circuit board, under serious intense blue laser beam emission and quite rapid temperature increasing, this line laser alignment tool gets perfect protection of laser tube from burning out and maintains the most stable blue laser line alignment in use.
Being made with the best quality glass coated lens or separate crystal lens, under requirement of different line length and line thickness in use, industrial blue line laser is available with wide range optic lens degree of 10 to 110 degree. No matter Gaussian beam or non Gaussian distribution blue laser light it is generated, after production into a high straightness and high linear quality blue reference line projection from beam aperture, this blue laser module just achieves the most satisfied line alignment result within the maximum work distance of 25 meters.
Under quite easy connect with DC input power supply with 9V operating voltage, industrial blue line laser is workable with continuous line alignment performance, including quite harsh working occasion of high temperature and strong corrosion as well. Under proper installation within the maximum distance of 3 meters, this compact structure made alignment laser enables quite convenient installation and adjustment of blue line thickness and targeting direction, it is making no barrier line positioning result in distance easily. In order to avoid hurt caused by powerful blue laser radiation and thermal energy, users should only wear laser safety goggles so as to achieve safe and free line alignment perfectly.
Green Laser Diode Module 200mW
Looking for the most efficient dot alignment solution for long distance and high lighting seriously? The operation of high power green laser diode module 200mW is the best choice to do so. Employed by the most easily absorbed and the most visible laser light emitted 532nm green DPS laser system, standing among the middle wavelength of visible optical spectrums, high power green dot laser is generating the most intense and powerful green laser radiation, and producing the clearest green reference dot projection result efficiently. Under operation without sunlight, green laser dot is also making clear dot indication under high lighting easily.
Supported by external DC input power supply, after easy accepting of wide range electric current within 100V to 240V, and converted into much lower voltage of 9V operating voltage, green laser diode module 200mW would just make sure of bright enough green reference dot projection in use. It is workable continuously. Although it can last a quite long time for continuous dot alignment work, however, it should also leave enough time for laser tube cooling down. Only if this alignment laser gets quite larger space and enough time for laser tube cooling down, this green dot laser is just achieving excellent laser light cycling use and highly reliable dot positioning result.
Not the same as formal plastic coated lens, after the adoption of qualified glass cylindrical lens, green laser diode module 200mW is keeping work with quite high laser beam transmittance and highly clear green dot projection in distance. It is an industrial stabilized dot laser alignment tool, but not simply used for temporary dot aligning work. In process of quite strict laser beam stability tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test, after applying for various industrial and high tech dot alignment work, this green dot laser is getting super strong environmental stabilization and the most stable green reference dot projection in long term use.
Under special design of separate metal heat sink cooling system and inner metal heat sink cooling system, high power green laser diode module 200mW gets the largest space reserving as its thermal emitting system. When there is quite rapid temperature increasing of laser tube, however, this alignment laser is preventing serious electric current impacting and protecting laser tube from constant increasing temperature, thus achieving extremely high laser beam stability up to 80% under continuous dot aligning work of 8 to 10 hours per day. Under quite high attention to the most powerful green laser light and thermal energy, after correct wearing of laser safety glasses, this high power green dot laser achieves easy and safe measurement effectively.
Excellent Performing High Power Blue Dot Laser Alignment
Usually it is quite complex work for users to make clear enough dot measuring result at quite long work distance. None of manual or mechanical dot aligning tool can be helpful at all. However, under condition that the genuine dot measuring work is processed with a quite high power blue dot laser alignment, after quite easy connect with an external DC input power supply, it is making sure of continuous and highly stable blue reference dot in distance easily. Every time this high power 445nm blue laser module is equipped with separate thermal emitting and making easy installation, it will make esay and highly clear dot generation on any raw material surface efficiently.
Not the same as formal output power made blue laser device, high power blue dot laser alignment is employing high power 445nm blue laser diode up to 150mW to 500mW. When it is generating the most powerful and intense blue laser light from laser beam aperture, after correct equipment with separate metal heat sink cooling system and external electric power source, this high power blue laser module just gets the largest space reserving as its thermal emitting and then keeping highly reliable blue dot projection in continuous work.
After connect with an external DC input power supply, high power 445nm blue dot laser alignment is keeping work with constant blue reference dot projection from laser beam aperture. It is supported by 9V operating voltage electric power source, and then generating quite charming and attractive blue laser light from beam aperture. As a result, besides its formal use for industrial dot aligning works, this blue dot laser is also getting quite satisfied dot aligning results for laser show, laser displaying, military targeting, laser medical therapy and other scientific research works etc. Although this 445nm blue laser module is keeping work constantly with other industrial machine or device, however, only if there is enough time leaving for laser tube cooling down, it gets reduced possibility of laser diode and electric driving circuit burning out and achieves the most reliable blue dot projection.
Whatever kind of working surface it is pointed, under important design part of APC, ACC driving circuit board, high power blue dot laser alignment is preventing serious electric current impacting and increasing temperature. Usually it is accepting operation within 8 to 10 hours per day, after proper installation and adjustment of dot diameter and dot targeting direction, this industrial alignment laser just achieves highly stable performance. Under proper avoiding of eye exposure to laser beam aperture and correct wearing of laser safety goggles, this blue laser module gets free and safe alignment constantly.