If users are looking for an easy operating line alignment under those of night version fields, it is not easy to reach with those of manual or mechanical line aligning work. However, after constant technical innovation of 808nm infrared laser diode tech and qualified separate crystal lens with different fan angles, laser tech engineer has just developed a quite practically used device of 808nm infrared laser line generator. In various night version precise line aligning work fields, only after its proper installation and adjustment to correct position, it just brings users easy and fine infrared reference line projection onto any raw material surface constantly.
Available with an import 808nm infrared laser diode within 100mW to 400mW, comparing with a simple infrared laser pointer, this infrared laser line generator is always in need to work for quite long time, and also having to work with stable and reliable infrared reference line projection in continuous use. It gets basic use of an import 980nm infrared laser diode as beam emitting source. In occasion that it gets special use of a metal heat sink cooling system, and highly durable anodized aluminum alloy housing tube, this 808nm infrared laser module is working well with superior nice thermal emitting and highly stable infrared line alignment within wide range operating temperature as well.
Being made with the best quality separate crystal lens within 10 to 93 degree, whatever kind of working surface it is pointing, this 980nm infrared laser line generator is working well with the best quality infrared reference line projection than formal glass or plastic coated lens. Whatever kind of working surface it is pointing, it is performing well with the same brightness and high uniformity infrared reference line projection. Only if users are getting basic measurement and experiment of technical data, after correct use of separate crystal lens degree and output power, this 808nm infrared laser module just makes highly precise and fine enough IR line generation for multiple application fields.
According to the use of laser alignment mounting bracket, this accessory part of 808nm infrared laser line generator always makes the most convenient installation and the easiest infrared reference line projection onto any raw material surface. It is projecting invisible infrared laser beam, which is generating potential thermal energy hurt to human eyes. It is a necessity to pay high attention to laser safety issue. When users are wearing correct infrared laser safety goggles and avoiding eye exposure to laser beam aperture, no matter what output power it is selecting, this infrared alignment laser just brings users highly secured and fine infrared reference line alignment for all night version fields effectively.
Unless the use of any manual line drawing or printing device, in order to make convenient and fine enough line alignment at various work distances, it is operating easy and quick with the assistance of a non Gaussian distribution 635nm red line laser module. It is always projecting at least 3 times brighter red laser light than formal 650nm red laser diode with the same output power. In occasion that it makes good use of thermal emitting system and constant power source from an external electric power source, it always allows the most convenient installation and the easiest red line emission onto a lot of working surfaces effectively.
Different from a simple square meter or blocking board, the real line alignment work with 635nm red line laser module just keeps work with constant red laser beam and red reference line projection from laser beam aperture. It is available with wide range output power of 5mW to 100mW. Being made with an import 635nm red laser diode and metal heat sink cooling system, this industrial stabilized laser line generator just achieves at least 40% improvement of laser beam stability. In addition, when it makes constant red reference line projection within 8 to 10 hours per day, after leaving enough space and time for tube cooling down, it is achieving excellent laser light cycling use, and highly reliable red reference line projection in continuous use.
According to easy use of an AC/DC adapter, without spending extra time on prior line printing or line drawing work, this 635nm non Gaussian beam red line laser module is working well, without any serious relying on manual labor force input or any mistake caused by manual operation. Being made with wide range electric current of 100V to 240V, after selection of different operating voltage of 5V, 9V 1000mA DC power supply, it always makes sure of long lasting red line projection. In addition, it is also keeping highly reliable red reference line projection under special occasion of increasing temperature and serious electric current impact as well.
On basis of easy use of a laser alignment mounting bracket, no matter what kind of working surface it is pointing, this 635nm red line laser module always makes sure of the easiest installation, and the most rapid red reference line projection onto a lot of raw material surfaces. When it makes freely adjusted red line fineness and line emitting direction within three dimensions, without the use of sunlight, this alignment laser makes high precision line generation within the maximum distance of 25 meters. Only according to special attention to thermal energy hurt to human eyes and wearing correct laser safety goggles, it just makes easy and secured line measurement in all application fields.
When users are trying to make highly clear dot measurement, it is not limited by either close or long distance, it is just making good job with the assistance of a 505nm green laser diode module. It is projecting green laser light directly from a 505nm green laser diode. In those of industrial and high tech precise dot measuring work fields, on basis of advanced use of qualified glass coated lens and constant power source supply, this ultra compact size tube made 505nm green laser alignment just assures continuous and highly stable green reference dot projection at various work distances.
Being made with an import 505nm green laser diode within 5mW to 100mW, this direct diode emission made 505nm green laser diode module is always getting at least 40% improvement of laser beam stability. In occasion that it gets basic use of a metal heat sink cooling system inside highly durable anodized aluminum alloy housing tube, either it is pointing under quite low or high temperature, this dot laser alignment still gets good protection of itself from mechanical moving or shocking etc. Any time it is making constant green reference dot projection within 8 to 10 hours per day, after leaving enough space and time for tube cooling down, it just achieves good laser light cycling use and highly reliable green reference dot projection in long lasting use.
Designed with a qualified glass coated lens, no matter it is pointing at close or long distance, this 505nm green laser diode module is working well with high transmittance green laser light, and highly clear green reference dot in long lasting use. For the most important of all, after a series of strict laser beam stability and aging preventing test up to 24 hours, within long lasting green alignment laser dot projection of 8 to 10 hours per day, this dot laser alignment just gets good laser light cycling use, and no decay light dot emission in all application fields.
According to the use of different size tube diameter of 16mm and 26mm, equipping with extending electric wires for both 505nm green laser diode module and DC power supply, it always enables freely installed distance of 3 meters, and the most convenient green reference dot projection onto any vertical or horizontal surface. When it makes correct use of output power and freely adjusted laser beam focus and green dot emitting direction within three dimensions, this green alignment laser gets increasing accuracy and brightness green reference dot projection in long time use. Any time users are taking laser safety measure and wearing correct laser safety glasses, without any eye exposure to laser beam aperture, high power green dot laser still makes easy and clear dot alignment in all occasions perfectly.
What is the best job for users to make highly clear dot measurement for all night version application fields? It is not easy to reach with any visible laser pointer or other manual dot projecting tool, but gradually substituted by 795nm infrared laser diode module. When it is projecting invisible infrared laser beam and infrared reference dot from laser beam aperture, it should be working as an accessory part. After its professional use with night version device and gets constant power source from DC power supply, this infrared dot laser just assures high quality infrared laser light emission and converts into highly clear and accurate infrared reference dot emission for all night version illumination fields.
Available with wide range output power of 5mW to 100mW, this 795nm infrared laser diode module is working well with highly intense infrared laser beam emission from laser beam aperture. It should only be equipping with night version device, such as CCD camera, black and white camera or infrared laser camera etc. According to real work distance, this infrared laser should be selecting with correct output power. Only after its proper use of 5V, 9V 1000mA AC/DC adapter, it just makes sure of constant infrared laser beam emission, and highly clear infrared reference dot projection at close distance.
On basis of advanced use of a qualified glass coated lens, no matter it is pointing at close or long work distance, this 795nm infrared laser diode module is keeping work with high transmittance and high photoelectric ability infrared laser light emission. It is easily getting highly clear infrared reference dot emission onto a lot of raw material surfaces, including military targeting, OEM infrared lasers, scientific research, infrared laser illumination and scientific research work etc.
Being made with the most important design part of APC, ACC driving circuit board, whatever output power it is selecting, this 795nm infrared laser diode module is keeping work with constant output power and electric current supply. Within constant work time of 8 to 10 hours, after leaving enough time and space for tube cooling down, this infrared alignment laser is working well with the most reliable dot emission and no appearance of laser light decay. When it makes easy screw of adjustable focus optic lens and immediate infrared laser light concentration, it converts into the most precise infrared reference dot emission in distance. When users are remembering to wear correct infrared laser safety goggles and avoiding eye exposure to laser beam aperture, it just assures highly secured and free dot alignment permanently.