Not simply relying on manual labor force input and quite long time spending on prior dot positioning works, it the is a major trend for user for the selection of high power red laser diode module. After easy connect with an external DC input power supply, it is always workable with the most intense and powerful red laser light emission and highly clear red reference dot projection in distance easily. On condition that high power red dot laser gets quite larger space leaving for thermal emitting and specially designed with separate thermal emitting system, it is always effective enough to gain highly stable and reliable red reference dot projection in continuous use.
The genuine dot alignment with high power red laser diode module is used for quite long time. In process of the most stable dot projection work, it is making use of external DC input power supply. Equipped with separate metal heat sink cooling system, when dot laser alignment tool gets the largest space leaving for laser tube cooling down, it is just achieving superior nice thermal conductivity and super strong environmental stabilization. The special use of aircraft used aluminum alloy housing tube is protecting laser tube itself from serious mechanical shocking, moving or calibration etc.
Under the selection of import 650nm red laser diode, beginning with high power up to 150mW to 500mW, this high power red laser diode module always generates the most powerful red laser light and thermal energy from beam aperture. When laser tech engineer is making super great consideration of thermal emitting and industrial stabilization, this dot laser alignment tool is being made with APC, ACC driving circuit board. Even though there is super rapid temperature increasing, however, the intelligent feedback system is protecting laser tube from overheating and over electric current impact.
Under considered operating time within 8 to 10 hours per day, only if there is enough time and space leaving for laser tube cooling down, high power red laser diode module gets the most efficient thermal conductivity and extremely stable red reference dot projection and long serving lifetime in constant use. Any possibility of eye exposure to beam aperture from high power red alignment laser might cause serious hurt to human eyes. Whenever users are paying high attention to powerful red laser light and possible thermal hurt, after proper wearing of laser safety goggles, high power red laser achieves high security measurement constantly.
When users are not able to make extremely clear and accurate dot measurement under night vision, it is not useful at all to only use visible laser devices. However, when laser tech engineer is developing a quite high power infrared dot laser alignment, under correct equipment with night vision device, which is able to work with extremely intense infrared laser light emission and highly accurate and clear IR reference dot projection in distance. This long wavelength made infrared laser module is only used as an accessory part, making quite convenient and accurate IR dot generation under all night illumination fields.
Owing to the employment of high power 980nm infrared laser diode up to 600mW to 1000mW, high power infrared dot laser alignment is always projecting quite high photoelectric ability up to 80%, which will easily obtaining the most intense and powerful infrared laser beam and highly clear infrared laser dot projection in distance. The genuine IR dot projection is not able to be used separately. Only if it is used under night vision device, such as a CCD camera, black and white camera or infrared laser camera, this infrared laser module would always make highly clear IR dot emission as long as 100 to 1000 meters in distance.
When high power infrared dot laser alignment is being made with import 808nm infrared laser diode, and separate metal heat sink cooling system, this metal housing tube made laser device always gets the largest space reserving as its thermal emitting system. In addition, in continuous IR dot aligning work, infrared laser module is getting the most rapid temperature increasing, which might increase possibility of laser module tube cooling down or burning out. When laser tech engineer is design it with APC, ACC driving circuit board, under constant output power and electric current supply, it is always getting excellent laser light cycling use and extremely stable IR reference dot projection in use.
In process of continuous dot positioning work, high power infrared dot laser alignment and DC input power supply are being made with electric wires extension. Featured by high temperature and strong corrosion resistance, and freely installed distance within 3 meters, it is allowing quite convenient installation. In addition, owing to quite special laser beam focus adjustment, after quite rapid laser light concentration from beam aperture, this alignment laser ensures the most compact size IR dot positioning result in distance. Any possible infrared laser beam exposure might cause serious hurt to human eyes. Only if users are avoiding eye exposure to beam aperture and remember to wear professional infrared laser safety goggles, it always gets secured and easy measurement constantly.
Looking for the most efficient dot alignment solution for long distance and high lighting seriously? The operation of high power green laser diode module 200mW is the best choice to do so. Employed by the most easily absorbed and the most visible laser light emitted 532nm green DPS laser system, standing among the middle wavelength of visible optical spectrums, high power green dot laser is generating the most intense and powerful green laser radiation, and producing the clearest green reference dot projection result efficiently. Under operation without sunlight, green laser dot is also making clear dot indication under high lighting easily.
Supported by external DC input power supply, after easy accepting of wide range electric current within 100V to 240V, and converted into much lower voltage of 9V operating voltage, green laser diode module 200mW would just make sure of bright enough green reference dot projection in use. It is workable continuously. Although it can last a quite long time for continuous dot alignment work, however, it should also leave enough time for laser tube cooling down. Only if this alignment laser gets quite larger space and enough time for laser tube cooling down, this green dot laser is just achieving excellent laser light cycling use and highly reliable dot positioning result.
Not the same as formal plastic coated lens, after the adoption of qualified glass cylindrical lens, green laser diode module 200mW is keeping work with quite high laser beam transmittance and highly clear green dot projection in distance. It is an industrial stabilized dot laser alignment tool, but not simply used for temporary dot aligning work. In process of quite strict laser beam stability tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test, after applying for various industrial and high tech dot alignment work, this green dot laser is getting super strong environmental stabilization and the most stable green reference dot projection in long term use.
Under special design of separate metal heat sink cooling system and inner metal heat sink cooling system, high power green laser diode module 200mW gets the largest space reserving as its thermal emitting system. When there is quite rapid temperature increasing of laser tube, however, this alignment laser is preventing serious electric current impacting and protecting laser tube from constant increasing temperature, thus achieving extremely high laser beam stability up to 80% under continuous dot aligning work of 8 to 10 hours per day. Under quite high attention to the most powerful green laser light and thermal energy, after correct wearing of laser safety glasses, this high power green dot laser achieves easy and safe measurement effectively.
Usually it is quite complex work for users to make clear enough dot measuring result at quite long work distance. None of manual or mechanical dot aligning tool can be helpful at all. However, under condition that the genuine dot measuring work is processed with a quite high power blue dot laser alignment, after quite easy connect with an external DC input power supply, it is making sure of continuous and highly stable blue reference dot in distance easily. Every time this high power 445nm blue laser module is equipped with separate thermal emitting and making easy installation, it will make esay and highly clear dot generation on any raw material surface efficiently.
Not the same as formal output power made blue laser device, high power blue dot laser alignment is employing high power 445nm blue laser diode up to 150mW to 500mW. When it is generating the most powerful and intense blue laser light from laser beam aperture, after correct equipment with separate metal heat sink cooling system and external electric power source, this high power blue laser module just gets the largest space reserving as its thermal emitting and then keeping highly reliable blue dot projection in continuous work.
After connect with an external DC input power supply, high power 445nm blue dot laser alignment is keeping work with constant blue reference dot projection from laser beam aperture. It is supported by 9V operating voltage electric power source, and then generating quite charming and attractive blue laser light from beam aperture. As a result, besides its formal use for industrial dot aligning works, this blue dot laser is also getting quite satisfied dot aligning results for laser show, laser displaying, military targeting, laser medical therapy and other scientific research works etc. Although this 445nm blue laser module is keeping work constantly with other industrial machine or device, however, only if there is enough time leaving for laser tube cooling down, it gets reduced possibility of laser diode and electric driving circuit burning out and achieves the most reliable blue dot projection.
Whatever kind of working surface it is pointed, under important design part of APC, ACC driving circuit board, high power blue dot laser alignment is preventing serious electric current impacting and increasing temperature. Usually it is accepting operation within 8 to 10 hours per day, after proper installation and adjustment of dot diameter and dot targeting direction, this industrial alignment laser just achieves highly stable performance. Under proper avoiding of eye exposure to laser beam aperture and correct wearing of laser safety goggles, this blue laser module gets free and safe alignment constantly.
If there is quite long work distance for users to get clear and fine enough line instruction on desired working surface, it is not helpful at all to stop in primary mind of manual or mechanical line aligning devices. When users are trying to make continuous line alignment for any type of industrial and high tech line aligning works, under operation of advanced 532nm green DPSS laser tech applied high power green laser line generator, it would make sure of high fine and clear green reference line emission in distance effectively. Designed with external electric power source and separate design part of thermal emitting system, high power green line laser would always make sure of highly clear and fine enough line generation at quite long distance and high lighting working occasions efficiently.
Comparing with any formal power made laser devices, high power 532nm green laser line generator gets beginning high power up to 200mW. When it is generating highly visible and bright green laser light at several miles far away, but also getting highly fine and accurate line generation at quite long distance in use. When it is operated without sunlight, it is also getting quite satisfied line positioning result under high lighting occasion. When it is getting quite low beam divergence and quite special laser beam divergence, this green laser module is keeping high fineness and high straightness green reference line in use.
When line alignment work is processed on multiple raw material surfaces, in order to achieve the most accurate line indication, high power 532nm green laser line generator is being made with excellent quality glass coated lens or separate crystal lens. Green reference line pointing is keeping high linear quality and high fineness. Usually it is passing through quite strict laser beam stability tests up to 24 hours, including super rapid electric current adding and up to 24 hours aging preventing test. When green line laser is being used by skilled users or professional with correct method, it is always keeping highly clear and accurate measurement, and extremely long serving lifetime in use.
Available with selected optic lens degree within 10 to 110 degree, high power 532nm green laser line generator is obtaining different line length and line thickness in use. It should be selected with correct output power and optic lens degree, and then achieving desired line aligning accuracy as expected. If there is no laser safety issue is adopted, powerful green light might cause serious hurt to human eyes and retina. Users should only wear proper laser safety glasses and avoid direct eye exposure, this high power alignment laser makes sure of easy and fine line generation in distance perfectly.