Intense Light High Power Red Laser Diode Module

Not simply relying on manual labor force input and quite long time spending on prior dot positioning works, it the is a major trend for user for the selection of high power red laser diode module. After easy connect with an external DC input power supply, it is always workable with the most intense and powerful red laser light emission and highly clear red reference dot projection in distance easily. On condition that high power red dot laser gets quite larger space leaving for thermal emitting and specially designed with separate thermal emitting system, it is always effective enough to gain highly stable and reliable red reference dot projection in continuous use.

high power red laser diode module
high power red laser diode module

The genuine dot alignment with high power red laser diode module is used for quite long time. In process of the most stable dot projection work, it is making use of external DC input power supply. Equipped with separate metal heat sink cooling system, when dot laser alignment tool gets the largest space leaving for laser tube cooling down, it is just achieving superior nice thermal conductivity and super strong environmental stabilization. The special use of aircraft used aluminum alloy housing tube is protecting laser tube itself from serious mechanical shocking, moving or calibration etc.
Under the selection of import 650nm red laser diode, beginning with high power up to 150mW to 500mW, this high power red laser diode module always generates the most powerful red laser light and thermal energy from beam aperture. When laser tech engineer is making super great consideration of thermal emitting and industrial stabilization, this dot laser alignment tool is being made with APC, ACC driving circuit board. Even though there is super rapid temperature increasing, however, the intelligent feedback system is protecting laser tube from overheating and over electric current impact.
Under considered operating time within 8 to 10 hours per day, only if there is enough time and space leaving for laser tube cooling down, high power red laser diode module gets the most efficient thermal conductivity and extremely stable red reference dot projection and long serving lifetime in constant use. Any possibility of eye exposure to beam aperture from high power red alignment laser might cause serious hurt to human eyes. Whenever users are paying high attention to powerful red laser light and possible thermal hurt, after proper wearing of laser safety goggles, high power red laser achieves high security measurement constantly.

Efficient Measured High Power Pro Red Dot Laser Alignment

Usually users are getting serious need of highly accurate dot projection at much longer distance, not simply limited within hand reaching, it would become the most efficient solution to select pro red dot laser alignment. It is generating the purest red laser light from 635nm red laser diode, available with at least three times brighter laser light emission than formal 650nm red laser device and the lowest laser beam divergence, this 635nm red laser module is keeping work with the most compact size red reference dot projection in distance effectively.

High Power Pro Red Dot Laser Alignment
High Power Pro Red Dot Laser Alignment

It is not easy to keep the most accurate dot measurement constantly. Instead of the use of alkaline battery power source, this pro red dot laser alignment is employing external DC input power supply as its electric power source. In process of continuous dot projection work, there is no need to spend extra time spending on battery power source, but keeping highly stable and reliable red reference dot projection under strong corrosion and high temperature. In addition, in order to make easy and convenient dot projection, both 635nm red laser module and DC power source are designed with extending electric wires. Within freely installed distance of 0.3 meter to 3 meters, this red laser module is easily installed and adjusted, and then achieving quite convenient dot projection without barrier at all.
Whatever kind of working surface it is pointed, pro red dot laser alignment would be applied for multiple working environments. According to the design of aluminum alloy housing tube and copper made laser diode core part, it is keeping work with superior nice thermal conductivity, and highly stable red reference dot projection under harsh working occasion, such as mechanical shocking, calibration or moving etc. In practical dot measuring work, this alignment laser is recommended with continuous dot projection work within 8 to 10 hours per day. When there is enough time leaving for laser tube cooling down, it is keeping work with excellent laser light cycling use and up to 80% beam stability in continuous work.
Whenever pro red dot laser alignment is used for multiple working environments, this pro red dot laser alignment is used as an accessory part. It is applied for multiple industrial precise device manufacturing works. Under operation with a laser alignment mounting bracket, including those of quite harsh working environments, noncontact red reference dot is easily reaching any raw material surface, without any tracking leaving on raw material surface. In process of continuous dot aligning work, it is also a key issue to avoid eye exposure and wear laser safety goggles until achieving easy and free measurement perfectly.

Continuous Measured High Power Blue Dot Laser Alignment

When users are getting serious need of highly accurate and clear dot projection at quite longer work distance than formal hand reach, formal power laser device or manual dot projecting tool can be workable at all. On contrary, on basis of advanced 445nm blue laser tech, beginning with high power up to 150mW to 500mW and separate design part of metal heat sink cooling system, high power blue dot laser alignment is regarded as a practically used dot positioning device. When high power blue laser gets easy connect with external electric power source and correct installation, it is easily achieving highly clear and accurate dot projection in distance efficiently.

high power blue dot laser alignment
high power blue dot laser alignment

The operation of high power blue dot laser alignment is much similar with a laser pointer, however, it is required to generate continuous blue reference dot projection in any type of industrial and high tech dot aligning works. It is selecting external electric power source from DC input power supply, which is just leaving quite larger space reserving as its cooling system. This aircraft used aluminum alloy housing made blue laser module achieves superior nice thermal conductivity and improving beam stability in continuous work. When blue laser dot targeting is processed under quite harsh working occasion, within wide range operating temperature of -10 to 45 degree Celsius, it is not affected at all, but also keeping work with the most stable blue dot projection, including harsh working occasions of mechanical shocking, moving etc.
If there is quite serious need of highly stable dot alignment, high power blue dot laser alignment is being made with high attention to laser beam stability. It is not only getting high attention to thermal emitting system, but also getting the most important design part of APC, ACC driving circuit board. Even thought there is serious electric current impacting from bema aperture, however, this high power blue laser module is not affected at all, but just keeping the most reliable blue dot projection within daily use of 8 to 10 hours.
Whatever kind of working surface it is pointed, high power blue dot laser alignment gets excellently designed glass coated lens. It is also equipped with front part glass window, under operation of dust or moisture, it is not affected at all, but just keeping highly clear blue dot projection on any raw material surface. If there is high intensity blue laser light generated from beam aperture, under operation of serious power and energy produced, it might cause serious hurt to human eyes. This alignment laser should be operated with proper wearing of 445nm wavelength preventing laser safety goggles, and then achieving easy and free use easily.

Invisible Beam Projected 980nm Infrared Laser Diode Module

When users are trying to make dot generation under night vision illumination work fields, until the time the real dot aligning work is processed with a long wavelength 980nm infrared laser diode module, under proper equipment with night vision device, such as a CCD camera, black and white camera or infrared laser camera etc, it will always make sure of highly clear and accurate IR laser dot alignment in distance effectively. When this IR dot aligning device is being used as an accessory part, after quite easy installation on correct position, it is getting reduced relying on professional skills, and then achieving highly clear and accurate dot generation effectively.

980nm infrared laser diode module
980nm infrared laser diode module

Designed with long wavelength of 980nm infrared laser diode, this infrared laser diode module is generating invisible IR laser beam to human eyes. It is not simply used for temporarily dot generation, but always workable with highly accurate dot generation result for special work fields, such as military targeting, surveillance, intelligence system and laser medical treatment device etc. It is not able to be used separately, but always used as an accessory part of night vision illuminated device, and then easily obtaining super clear dot generation result on any vertical or horizontal surface.
Comparing with formal visible laser devices, 980nm infrared laser diode module is obtaining even higher power up 500mW, which is able to work with even longer distance dot generation. It is keeping super high photoelectric ability up to 80%. When dot projection is processed at long distance of more than 50 meters, this infrared laser alignment tool should be selected with higher power up to 200mW to 500mW, which will obtain highly clear IR dot projection as long as 100 meters to 1000 meters.
In order to get quite accurate dot generation constantly, 980nm infrared laser diode module gets the most important design part of APC, ACC driving circuit board. Even though there are super powerful and intense thermal energy produced from beam aperture, however, this alignment laser still gets intelligent feedback of electric current impacting, and then achieving highly stable and reliable dot projection on continuous work. Whatever kind of output power it is selected, it is always generating extremely powerful thermal energy and IR laser light not visible to human eyes. Users should just wear 980nm wavelength preventing laser safety glasses and avoid eye exposure, and then achieving highly secured and free dot alignment constantly.

Excellent Performed High Power Green Laser Diode Module

Whatever kind of industrial and high tech dot aligning work fields, it is just a full of challenge job for user to obtain extremely accurate dot alignment result at quite long work distance. However, laser tech engineer has just paid high attention to the development of advanced 532nm green DPSS laser system, when it is designed with extending space reserving as its cooling system. In process of continuous dot alignment work, this green laser device is maintaining excellent laser light cycling use, and then achieving highly stable dot alignment for all high tech and machinery processing works perfectly.

High Power Green Laser Diode Module
High Power Green Laser Diode Module

On basis of selected high power of 200mW, comparing with formal green laser device, it is generating even more visible green laser beam, which is also emitting even more thermal energy in continuous dot alignment work. This high power green laser diode module is being made with special thermal emitting system. The separate metal heat sink cooling system has just assured even larger space reserving for thermal stabilization. It is reaching as high as 80% laser beam stability under continuous green reference dot aligning work.
In order to achieve highly clear dot generation all the time, high power green laser diode module is employing quite high quality glass coated lens. Besides its operation under long distance, it is also workable with highly clear dot generation under high lighting working occasion etc. It is keeping high laser beam transmittance, and then fulfilling extremely clear dot generation at quite long distance. In order to achieve nice laser light cycling use, before this alignment laser is available on the market, it is passing through a series of strict laser beam stability tests of more than 24 hours. It is getting super strong aging preventing, which is able to work with super long serving lifetime under operation by skilled users and professionals.
When high power green laser diode module gets constant electric power source, it will make sure of continuous green reference dot projection easily. In process of constant dot alignment, there will produce super strong thermal energy in use. However, APC, ACC driving circuit board is providing efficient preventing of electric current impacting, and then assuring highly stable dot generation in proper use. Within daily operating time of 8 to 10 hours per day, with enough time leaving for laser module cooling down, it will greatly reduce possibility of laser diode and electric driving circuit burning out or damage. Under operation with special use of 532nm wavelength preventing laser safety glasses, this industrial alignment laser just assures highly secured dot alignment constantly.

No Decay Light High Power 635nm Red Laser Diode Module

Every time users are not able to make super clear dot alignment at quite long work distance or high lighting working occasion, it would be a super great technical innovation for the real precise device manufacturing works. In order to get quite easy and accurate dot alignment in distance, it is a great chance to use a high power 635nm red laser diode module. In order to maintain highly stable and reliable dot alignment, this high power 635nm red laser device is being made with super strong environmental stabilization. When it is being made with excellent thermal emitting and constant electric power source, it will easily get highly stable dot generation in long term use.

high power 635nm red laser diode module
high power 635nm red laser diode module

On basis of very easy use of AC/DC input power supply, high power 635nm red laser diode module is obtaining continuous red dot alignment immediately. It is accepting wide range electric current input within 100V to 240v, which is converting into quite lower operating voltage of 9V output electric source. It is able to work with wide range output power of 150mW to 500mW, which will always make sure of constant and highly clear red reference dot generation in long term use. On basis of quite easy design of high temperature and corrosion resistance electric wires for both high power 635nm red laser and DC input power supply, it is just able to work with highly stable dot generation under all kinds of harsh working occasion, including strong interference or strong static etc.
Without worrying about laser light decay in continuous work, high power 635nm red laser diode module is getting quite high quality glass coated lens. Usually it is passing through up to 24 hours aging preventing test, this laser dot alignment tool is always keeping quite clear laser beam emission, and highly clear red dot emission in distance. Owing to its special laser beam mode of TEM00, red laser dot is just keeping good round shape, and the most compact dot diameter. Users should only make very easy screw of laser beam aperture, highly intense red laser beam is concentrated, and then obtaining the most compact size red alignment laser dot generation in distance efficiently.
Whenever users are making continuous dot alignment in various machinery processing work, 635nm high power red laser diode module would be used under all kinds of harsh working environments. The time it is generating extremely intense and powerful red laser light and thermal energy, it is a key issue to wear proper 635nm wavelength preventing laser safety goggles and avoid any eye exposure to powerful red laser light, this high power alignment laser would always make sure of highly secured and free dot measuring result constantly.

High Intensity Beam High Power 650nm Red Laser Diode Module

If there is quite strict requirement of highly accurate dot alignment at quite long work distance, it is just becoming a trend for users to use advanced laser tech applied high power 650nm red laser diode module. It is employing high power 650nm red laser diode as its laser beam emitting source, owing to its beginning high power of 150mW to 500mW, it is workable with super intense and bright red laser beam emission with several miles far away. On basis of quite easy selection of output power and adjustment of laser beam focus, highly intense red laser light is concentrated, and then achieving super clear red reference dot targeting immediately.

High Power Red Laser Diode Module
High Power Red Laser Diode Module

Owing to excellent use of high power 650nm red laser diode as its laser beam emitting source, this high power red laser is generating super clear red laser beam at several miles far away. It is available with high power range of 150mW to 500mW, unless its use under sunlight, it will easily get super clear dot generation under high lighting and long distance efficiently. Anytime users are connect with red laser device with a DC input power supply, it will make super clear and rapid dot generation on any working surface.
When high power 650nm red laser diode module is used for long term continuous dot alignment work, it should be workable with super strong environmental stabilization. The adoption of aircraft used aluminum alloy housing material and copper material made laser diode core part are assuring superior thermal conductivity, and improving possibility of laser beam stability in continuous work. However, if this dot laser alignment is workable for quite long time without break, it will increase possibility of laser diode and electric driving circuit burning out or damage. With daily operating time of 8 to 10 hours per day, it assures excellent laser light cycling use and highly stable red reference dot emission in continuous work.
If some of working place is not easy to reach, the genuine use of high power 650nm red laser diode module can work with the assistance of a laser alignment mounting bracket. Red reference dot targeting direction is freely adjusted within three dimensions, and then achieving highly clear dot positioning result on any vertical or horizontal surface efficiently. Anytime users are wearing professional 650nm wavelength preventing laser safety goggles and avoiding eye exposure to powerful laser light, high power alignment laser just assures high security dot alignment constantly.

Constant Beam Emitting 808nm Infrared Laser Diode Module

Not the same as any other visible laser devices, once dot alignment is processed under night vision work fields, it would be extremely nice job for users to make use of a long wavelength made 808nm infrared laser diode module. It is a quite direct infrared laser beam emitting device, according to its easy equipment of IR device, such as a CCD camera, black and white camera and infrared laser camera, this infrared laser alignment device would just make sure of highly clear and accurate IR reference dot targeting in distance.

Comparing with formal visible laser device or manual dot aligning device, this 808nm infrared laser diode module is always bringing users totally different experience for any type of night vision illumination work field. It is getting even longer wavelength than any other formal visible laser devices. It is generating totally invisible laser device from laser beam aperture. In formal dot alignment use, this IR dot laser alignment tool always used as an accessory part, which is also getting different use, including military targeting, laser medical treatment, surveillance and intelligence system etc. This invisible IR laser device is not able to be used separately, but always operated as an accessory part, and easily obtaining clearly visible IR dot on desired working surface effectively.

According to its selected output power of 5mW to 400mW, not limited at quite close distance, this 808nm infrared laser diode module is workable at quite long distance. It is keeping up to 80% photoelectric ability, no matter what kind of output power it is selected, it is keeping quite high intensity infrared laser beam emission, and then making sure of the most concentrated IR reference dot targeting in distance. When this infrared laser alignment tool is selected with higher output power of 200mW to 400mW, the genuine IR laser dot aligning distance can be extending as long as 100 meters to even longer distance.

In order to get quite easy and convenient installation and adjustment, this 808nm infrared laser diode module is adopting quite durable and compact structure of only 16mm and 26mm, which is able to be installed on any other device. When it is generating extremely intense IR laser beam from laser beam aperture, the special use of APC, ACC driving circuit just assures the most efficient preventing of electric current impacting, and then making sure of the most secured infrared alignment laser dot targeting in long distance. Whenever it is generating invisible IR laser light from laser beam aperture, it is an important issue to avoid eye exposure and wear proper 808nm infrared laser safety goggles, and then achieving highly secured IR dot alignment in long term work.

808nm-infrared-laser-diode-module-1

Adjustable Focus Designed 650nm Red Laser Diode Module

Without any serious limitation of real work distance, high height or other hard reaching places etc, whenever users are getting the chance to make dot alignment with a 650nm red laser diode module, it would just make sure of quite marvelous and accurate dot measuring result on all working surfaces effectively. This is a quite professional laser dot alignment tool, on basis of good equipment with external DC input power supply, and quite easy adjustment of laser beam focus, professional alignment laser would just work with highly accurate and high speed dot instruction result on all working surfaces effectively.

650nm red laser diode moduleWhen 650nm red laser diode module is being made with high duration aircraft used aluminum alloy housing material, it is bearing quite wide range operating temperature within 10 degree to 45 degree Celsius. At the same time, on basis of quite nice equipment with metal heat sink cooling system and copper raw material made laser diode core part, this alignment laser is always obtaining superior nice thermal conductivity, and maintaining highly stable red reference dot targeting in long term use. In order to get quite clear dot instruction and excellent laser light cycling use, the genuine red laser dot alignment work should be properly controlled within 8 to 10 hours a day. When it is getting enough time reserving as laser diode and electric driving circuit burning out, it is just getting improving laser beam stability, and also obtaining quite long serving lifetime of more than 8000 hours.
Anytime dot alignment is processed on various targeting surface, different users would require different size dot diameter in distance. The formal laser dot aligning work with red laser diode module is just allowing free and easy measurement within the maximum work distance of 25 meters. At the same time, any time the dot aligning work is processed in quite complex working occasion, it should just avoid operation under sunlight. On basis of the use of laser alignment mounting bracket, even though dot aligning is process on hard reaching place, noncontact red alignment laser dot is allowing free adjustment within three dimensions and free installation within 3 meters, and then easily obtaining highly clear dot instruction in use.
No matter what kind of work field, 650nm red laser diode module is always being used as an industrial stabilized dot aligning tool. It is workable as an accessory part of other machine or device, and then easily obtaining highly clear red alignment laser dot targeting on any vertical or horizontal surfaces effectively. When laser dot alignment is proceed with high power red laser device, any time it is generating super intense laser light and thermal energy, it is never a kidding work and should be used with proper wearing of 650nm wavelength preventing laser safety goggles, which will always make sure of high security dot alignment in long term use.

The Purest Light Emitting 635nm Red Laser Diode Module

If there is serious need of quite accurate dot alignment on various targeting surfaces, it is a quite hard work to get ideal dot aligning result as expected. According to the adoption of high brightness 635nm red laser diode module, on basis of its at least 5 times brighter laser light emission from laser beam aperture, this red laser device is always generating the purest and the brightest red laser beam and red laser dot in distance. Usually after quite easy installation and adjustment of laser beam focus and dot targeting direction, this dot laser alignment tool is just able to work with quite clear and rapid dot instruction on all working surfaces effectively.

635nm Red Laser Diode Module
635nm Red Laser Diode Module

It is not an easy job for users to get clear enough dot alignment at quite longer work distance, thus it is just the time for users to give up the use of simple sticker or laser pointer. When 635nm red laser diode module is adopting external DC input power supply, it will make super rapid dot instruction in distance. There is no need to make battery changing, and no worry about laser dot alignment disturb. Supported by 3V or 4.2V DC input power supply, this laser dot alignment tool is able to work within wide range output power from 5mW to 100mW, and then easily obtaining super clear dot instruction on various targeting surfaces.
When internal part of 635nm red laser diode is available with TEM00 laser beam mode, no matter what kind of targeting surface, it is getting the best round shape red dot with the smallest diameter. At about 2 meters work distance from laser beam aperture, red laser dot is only available with 1mm to 2mm. Even though dot alignment work is processed at quite long work distance, this red laser alignment tool is keeping the smallest and the brightest dot instruction while comparing with other visible laser devices. According to very easy roast of laser beam aperture part, high intensity red laser light is temporarily focused into a quite small size dot, and then fulfilling the clearest dot instruction for all kinds of industrial and high tech dot alignment fields.
Owing to the special design of electric wires extending for 635nm red laser diode module and DC power supply, the real dot alignment work is allowing operation 0.3 meter to 3 meters in distance. Noncontact alignment laser dot targeting is overcoming any working occasion, such as high height, long distance or other hard reaching places etc. In order to get secured dot alignment in long term use, and avoid hurt caused by intense thermal energy, users should always remember to wear proper laser safety goggles, and then obtaining the clearest and secured dot alignment perfectly.